Facebook
Categories
Categories

How is corrosion protection done for offshore wind turbines? How many hours can the salt spray test pass?

Oct 26th,2026 69 Views
  • Coating design for offshore wind turbines. The core of the coating design is to resist the extreme corrosive marine environment over a design life of more than 25 years. In accordance with the requirements of Clause 5.1.1 of ISO 12944-2 and ISO 9223, the atmospheric environment is divided into six atmospheric corrosivity categories: – C1 (very low corrosivity), C2 (low corrosivity), C3 (medium corrosivity), C4 (high corrosivity), C5 (very high corrosivity), and CX (extreme corrosivity). These six categories rank atmospheric corrosion environments from the lowest to the highest corrosivity. Under normal conditions, the coating system is designed and executed in accordance with the C5H corrosivity category (per ISO 12944-1, Clause 5.5, "high (H): 15 to 25 years").

  • Coating form: The mounting (installation) surfaces of the product conventionally use hot-sprayed zinc-aluminum alloy; non-installation surfaces are finished with a composite coating system, either thermal-sprayed zinc + intermediate coat + topcoat, or primer + intermediate coat + topcoat. Surfaces left uncoated are protected with rust preventive agents (e.g., VPCI 329D, VPCI 368, Tectyl 502C, etc., as provided in combination with the customer).

  • The core concept of the salt spray test is to artificially simulate a marine salt spray environment in the laboratory, in order to rapidly verify the corrosion resistance of products or materials. It is a commonly used accelerated test method for validating product quality and reliability. According to the requirements of Clause 5.6 of ISO 12944-6, for the C5H corrosivity category the neutral salt spray test (NSS) is selected in accordance with ISO 9227 (GB/T 10125), and must meet ≥ 1440 hours. After the salt spray test, the surface condition of the tested product is assessed in accordance with the requirements of the ISO 4628 series (GB/T 6461). Based on existing paint test data, the results reach 3000 hours, far exceeding the standard requirement.