011.20.1385.000.11.1504

250.14.0300.013

support for wind energy solutions

UWE manufactured new slewing bearings used for small wind turbines with the rolling central diameter 802mm and 422mm. UWE is engaged in all wind energy solutions to everyone.

Wind Power Hits Record High In China’s Coal Hub

Following a continuous surge in capacity levels over the past half decade, the northern Chinese coal hub of Shanxi province posted a record level of wind power generation in the second half of January.

china wind turbinesAccording to official data, wind power comprised a total of 14% of electricity generation in Shanxi province on January 18, 2015, with the full day wind power generation amount reaching 69.26 gigawatt-hours in total.

On the same day, the contribution made by wind power to the grid in Shanxi province reached a record-breaking high of 3.698 gigawatts at 12:24 in the afternoon.

As of the end of last year, Shanxi province’s installed wind power capacity had reached a total of 4.85 gigawatts, making it the second-largest electricity source within the province.

In 2014, the full year wind power generation amount was 7.524 terawatt-hours, while the average annual usage time for wind power modules was 1912.1 hours.

Shanxi’s increasing usage of wind power and other sources of renewable energy is particularly noteworthy given its status as one of China’s most polluted provinces, chiefly as a result of the prominence of the local coal mining industry and its importance to the country’s overall energy supply.

The province’s urban centres are notorious for the severity of their air pollution, with Linfen frequently cited by World Bank assessments of air quality as the most polluted city on the planet.

In addition to expanding installed wind power capacity, Shanxi province is also striving to deal with the problem of intermittent generation and increase usage efficiency, via the development of a province-wide automated control system based on forecasts of air patterns.

The system is expected by the local government to achieve an increase in wind power absorption by the grid of as much as 23%.

Wind power isn’t Shanxi’s sole source of renewable energy. As of the end of last year, Shanxi’s installed solar power capacity was 405 MW, while in 2014 its solar power generation amount reached 315.1 gigawatt-hours, with an average generation time of 1518.4 hours.

Renewable energy currently accounts for roughly 9% of province-wide installed power capacity.

First wind turbines to be built in English Channel in 2017

Wind turbines will be seen off the south coast of England by 2017 after the first wind farm in the English Channel got the formal go-ahead.
Energy giant E.On said on Monday that it had decided to begin construction on the £1.3 billion, 116-turbine Rampion offshore wind farm, eight miles off the Sussex coast.
The first of the turbines will be installed in early 2017 and the project is due to be completed and generating power by 2018, producing enough electricity for 300,000 homes.
The wind farm, spanning 28 square miles, will be most visible from Brighton and Worthing.
The go-ahead follows a £236 million investment in the project from the Government's Green Investment Bank.
When the project got planning permission last year, the National Trust and South Downs National Park Authority (SDNPA) warned that views from the national park, including Beachy Head and the Seven Sisters, would be "unacceptably" spoilt by the turbines.
E.On has since slashed the proposed number of turbines, from 175 down to 116, to try to address the concerns.
The SDNPA also warned at the time that fragile chalk grasslands would be damaged in order to lay 17 miles of onshore power cables for the project.

UWE general manager was interviewed by CBN

UWE bearing attended the Hannover Mess 2015 from April 13 to April 17.
During the exhibition, UWE bearing general manager Mr. Xie was interviewed by China Business News mentioning that   "Most of UWE customers are domestic market, we hope that we could learn new and advanced technology by attending this exhibition, on the one hand we are aim to develop overseas market." 
Hannoer Mess offered great chance for Chinese companies to open eyesight,learn technology and get communications.
During the messe, UWE got nearly 150 foreign customers coming to see our slewing bearings, and they showed great interests in UWE bearings, especially for the zinc coating and painting. The exhibition offered great paltform for both supplier and customers.
UWE also will keep attending and learning for bright future.

UWE bearing introduction

UWE bearing was located in the capital of bearings-Wafangdian,specializing in development, design, production and service of slewing bearings, wind power bearings, wire race bearings.The annual output is more than 2000 pieces,providing clients with over 40 professional slewing bearing solutions. Since 2008, UWE offers excellent services to global customers with the business philosophy:“Technology priority,Quality first, Credit-oriented”. UWE has become qualified supplier for ZWZ,Sinovel Wind Group, NHI,CSIC and many famous customers home and abroad.
UWE strictly control the quality of every bearing from APQP,PPAP to product batch delivery,replying on professional design knowledge, abundant production experience,exquisite operation skills,advanced processing equipment and strict quality control.(Zero Defect,100% Inspection,100% Traceability )
Forging:100% Incoming inspection(dimension test,hardness inspection,ultrasonic flaw detection)
Mark identification forging number and make traceability card to ensure all forgings controlled and traceable.
Rough turning:Lay a good foundation for fine turning, and strictly control the dimension and precision.
Inspection:Inspector inspects dimensions to ensure subsequent machining process,and fill in test report and traceability card.
Heat treatment:Professional heat treatment processing equipment and technology to control the quenching layer hardness and uniformity.
Temper: Eliminate the internal stress of rings during quenching, reduce the brittleness of hardened steel to ensure the strength, toughness, plasticity, elastic and other comprehensive mechanical properties.
Heat treatment inspection:Inspector makes the dimensional inspection,test hardness and depth by use of hardness tester and hardening layer thickness gauge. Meanwhile inspector fills in traceable test report.
Fine turning:CNC processing equipment ensures the precision and accuracy of bearing end face.
Hole machining:Imported CNC drilling machine, improve the machining accuracy and shorten the processing time of hole; Horizontal boring machine ensures the hole roundness, size and fit precision with ball plug.
Gear milling&shaping: High-speed gear milling machine and CNC gear shaper achieve the tooth accuracy and reliability one-time.
Inspection: Professional inspector makes dimensional test and fill in traceable report.
Gear quenching: CNC quenching machine tool can meet customers' various requirements of gear.
Turning&grinding:Combining turning with grinding in one CNC machine to ensure final machining accuracy and reliability, reduce repeat positioning,improve work efficiency.
Assembly:Self-developed high precision assembly equipment controls the bearing assembly clearance, torque and operation stability.
Sealing:Design seal structure according to bearing working condition and adopt imported Simrit seals to prevent dust, water, oil leak, prolong the service life of bearing in harsh conditions.
Inspection:Each bearing is tested by mounting and running,especially for wind power bearing, UWE has wheel hub to test meshing state to ensure bearing can be installed in client-side.
Physical&chemical measurement:UWE is equipped with the complete physical and chemical measuring equipment, which can realize many physical and chemical experiment.
Finished product:Every step of the production is carried out strictly in accordance with quality control documents,and equipped with a full set of quality inspection report. Inspector issues bearing assembly report,test record,and certificate according inner ring and outer ring traceable cards.
UWE keeps improving on product,quality and service to guarantee the customer requirements . At present,UWE has got through certifications of some management systems including ISO9001-2008 Quality Management System, ISO14001-2004 Environmental Management System, OHSAS18001-2007 Occupational Health&Safety Management System, and won New High-tech Enterprise,and 13 national patent certificates.
UWE appeals to the faith of quality first,service first to develop market and serve customers. UWE is always committed to build its own brand,and keeps research ,development,design and innovation continuously. Technology support UWE,Quality achieve eternity.
Based on China, Facing the world.

UWE turntable bearings

UWE turntable Bearings sometimes referred to as slewing ring bearings, are 4 point contact thin section type ball bearings.  Preload can be reduced for low torque or increased for high rigidity requirements.  
UWE turntable bearings can be used for excavators, cranes,trailers,trucks and many other machinery.
UWE turntable bearings can accommodate axial, radial and moment loads acting single or in combination and in any direction. They are not mounted in a housing or on a shaft, but directly to a seating surface. The inner and outer ring are supplied with mounting holes. Both rings may have integral gears. They are also referred to as slewing rings and tabletop bearings. Slewing ring bearing can perform oscillating (slewing) as well as rotating movements. They may be used without gears or with internal or external gears.
Slewing ring bearings can take moment load and radial load, besides take thrust loads; There are ball bearing, roller bearing and ball-roller bearing at type; There are single-row, double-row and three-row at structure. With teeth and without teeth on conduction(outer or inner ring); At dustproof and leak grease proof type, with airproof and without airproof. At mounting with flanged(outer or inner ring), with bolt hole and without flanged. 

2015 Hannover Mess

UWE will attend in 2015 Hannover Mess in Germany during 13 April,2015-17 April,2015., and we will bring 1.5MW blade bearing to the exhibition.  
Our booth number is: Hall 25, L13-25 and L13-26
UWE will be waiting for you there.

Wire-race bearings application

Stratosphere observatory for infrared astronomy.
An aluminum three-row wire-race roller bearing with a bolted steel gear ring for the rough adjustment of the telescope was applied. The telescope is in the rear of a converted Boeing 747.During the flight, a sort of “sliding roof” opens to enable the telescope to make astronomic observations in the infrared range.
Optical telescopes
Three-row wire-race roller bearing was designed for telescopes. The bearing rings are made of aluminium.The bearings enable the adjustment of the M2 mirror.In addition,a surface-hardened three-row precision bearing was supplied to adjust the M3 mirror.Astronomic faculties use these telescopes for their extensive research.
Articulated buses
Hybrid-type four-point bearing was manufactured for the articulation of buses, consisting of a wire race bearing part and a surface-hardened part.The majority of the articulated buses are referred to as pushers, i.e. the engine and entire drive unit are located in the rear section, in the trailer.This concept puts a lot of specific requirements on the articulation, such as buckling stability, for instance, which is achieved by means of a complicated electronically-controlled damping system.

«123456789101112»

Powered By Z-Blog 2.2 Prism Build 140101

Copyright UWE Slewing Bearing Some Rights Reserved.